Programming 8051 with USBASP-8051

The USBASP is a serial programmer having Serial Peripheral Interface for programming . The programmer consists of 10 pin standard serial connector for connecting to the target board for programming. The USBASP consists of the ATmega8 IC which can be connected through USB port as ELEMENTZ 8051 PROGRAMMER by providing suitable driver form here.

snap_module

 

Connect the USBASP Programmer to the USB port after installing the ELEMENTZ 8051 Driver pack. Device manager should have an entry as shown in the figure.

Device_driver

 

10 pin FRC Pinout is as follows

pinout

Connect the 10 pin FRC Cable to the 89S51/52 Target board as shown below.

usb_connect

 

Open ProgISP software and start programming after selecting the Device and Load Flash.

select_micro

 

A detailed User Manual can be downloaded from our GitHub Channel.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s